Roof repairs in Hampshire and Surrey

How we establish the extent of a roof repair

1. Record the leak pattern. Start with the room affected and the conditions that bring water indoors. A stain that develops during wind-driven rain points the inspection towards different details from a constant drip beneath a valley.
2. Inspect beyond the obvious gap. We examine the covering above and beside the reported problem. The aim is to connect the indoor symptom with an outside defect, including hidden routes beneath overlapping tiles or slates.
3. Identify what can stay. The surrounding roof is assessed for secure fixings and serviceable materials. This establishes a sensible repair boundary and shows which neighbouring pieces need lifting to reach the damaged layer.
4. Complete the agreed repair. Failed components are removed and the exposed base is checked. Replacement coverings and weathering details are fitted into the existing roof, with additional damage explained before the repair scope changes.
5. Review the repaired junctions. We check the repaired section against the adjoining courses and drainage route. Broken fragments are collected, and the handover explains which defect was addressed and which part of the roof was repaired.

Match the repair to the failed component

• A covering repair: Replace a broken tile or slate where the base and neighbouring covering remain usable. Correct dimensions and overlaps matter more than simply covering the visible opening with a convenient spare.
• A junction repair: Rain entering beside a wall calls for inspection of the connection with the roof. Local lead work restores a failed flashing or valley detail without assuming every tile needs replacement.
• A larger local opening: Several damaged rows require enough covering to be lifted to inspect the support. We explain the boundary between that repair and new roofs when deterioration extends across separate slopes.

How long roof repairs takes

Repair duration follows the fault, access and amount of covering that needs opening. Matching replacement tiles, renewing a valley lining and exposing wet battens involve different sequences, which we explain once the damaged area has been assessed.

What affects the price

• Position of the fault relative to safe roof access
• Quantity and profile of damaged tiles or slates
• Extent of ridge, hip or valley work needed
• Condition of battens uncovered beneath the leaking section
• Removal and reinstatement of adjacent serviceable roof coverings

A useful repair quote names the defective detail and the work proposed there. Ask for a free quote with a description of the leak and any previous patching in that area.

Looking after it afterwards

Track the original stain after rainfall and report fresh water rather than judging the repair by old discolouration. Allow damp finishes to dry before decorating. Keep photographs of the affected ceiling to compare changes after the roof work.